Exit Signs

Our Exit Signs work with these Lighting Sources:

  • Fluorescent
  • Metal Halide
  • Mercury Vapor
  • LED, with color temperature 4,000 K and greater

Contact EverGlow

Toll Free: (1) 866-744-4706
Telephone: (1) 704-841-2580
Email Us: info@EverGlow.us

EverGlow Exit Signs are tested, evaluated & listed according to UL924 (Underwriters Laboratories performance standard for Emergency Lighting & Exit Signs, UL924). The glow legend is fully legible for 90 minutes after the failure of normal lighting, as required by building and fire codes, as well as

Tough, School Proven Design
Tough, School Proven Design

NFPA 101, The Life Safety Code. These signs are visible and legible from a distance of 75 feet.

Photoluminescent exit signs need appropriate ambient lighting of at least 5 foot-candles on the sign face at all times.  Most building and fire codes require all (electrical and non-electrical) exit signs to be continuously illuminated (24/7).  NFPA 101, The Life Safety Code, requires all (electrical and non-electrical) exit signs to be illuminated only while the building is occupied. For comparison, 5 ft-candles is roughly the amount of light needed to read a newspaper held at arm’s length. A single light fixture near the exit sign may be all that you need.

Most office spaces have between 20 and 50 ft-candles of illumination, which is more than enough to keep the signs charged. Hospitals, schools, and retail stores typically provide enough lighting as well.

Our Exit Signs glow in the dark!
  • Maximum Reliability & Effectiveness
  • No Electricity, No Batteries, No Lamps
  • Durable, will Last for Decades
  • Explosion Proof Design
  • No Toxic or Radioactive Components
  • Easy Installation
  • Low Maintenance

Installations

Framing Systems

EverGlow Photoluminescent Exit Signs may be offered with or without a frame. We offer two different frames: our Standard Architectural Frame and our Extra Low Profile (ELP) Architectural Frame.

Standard Architectural Frame

Extra Low Profile (ELP) Architectural Frame

Fail Safe EverGlow Photoluminescent EXIT Signs

EverGlow code approved photoluminescent exit signs are excellent for use in all facilities- factories, office buildings, schools, hospitals & hotels. With approval by the Authority Having Jurisdiction (AHJ) in your locale, these signs can be used as a replacement for “over the door” electrically powered exit signs and as floor level exit signs.

EverGlow signs are an acceptable “alternate material” in most jurisdictions & those that have not yet adopted the recent code language. The use of alternate materials, design & methods of construction and equipment is clearly provided for in the IBC, Chapter 1.

The resources at the bottom of this page will give you the information you need to present to the building inspector or his supervisor. Please let us know if you need any additional documentation.

EverGlow aluminium signs feature a durable unitised single layer construction. We use no plastic in our design. The thin, solid construction features a vandal resistant, non-glare ceramic surface.

Installed as Required by Many Jurisdictions
EverGlow Signs & Markers Consume ZERO Energy!

Products

1-Sided Exit Sign with Standard Architectural Frame, Installed Flush on the Wall

Choose a color

1-Sided Exit Sign with ELP (Extra Low Profile) Architectural Frame

Choose a color

Exit Sign Face Only

Exit Sign Face Only

Choose a color

1-Sided Exit Sign with Standard Architectural Frame & Mounting Bracket

Choose a color

2-Sided Exit Sign with Standard Architectural Frame & Mounting Bracket

Choose a color

Information about EverGlow Code Approved Photoluminescent Exit Signs

Ask an Expert
© 2024 EverGlow